|
| |
  
 |
A superior technical specification and
stylish design combine to create a unique mix of performance and elegance. The SIM2 SVP
420 HB offers the ultimate in high quality large screen viewing; an experience of
image quality only available from CRT technology. The SVP 420 HB
is equipped with high resolution Delta TAC 4 lenses, which provide superb image
quality. Featuring the
latest in electronic innovation, these two projectors are fully modular in design and
equipped (optional) with the latest SIM2's Up Converter (UPC 2000). By using to the
main board, the UPC 2000 provides superior PAL/SECAM/NTSC signals by
doubling the lines or doubling the field (100Hz).
The projector uses a DTI
digital circuit to increase colour resolution, and a COMB filter to reduce cross
colour / cross luminance. It is also equipped with a noise reduction system, a specific
circuitry to enhance the dynamic focus, hue control (for NTSC) and sharpness
control. Convergence and set up are controlled by remote and all of the projector
parameters: set up configuration, image aspect ratios including 4/3, 16/9
anamorphic or widescreen and scan frequencies can be selected, copied, moved and saved in
up to 25 different memory banks. Offering up to 5 separate inputs (including 2 S-Video,
RGB and Component Input for DVD players) all switchable by remote control handset.
In addition, two 12 Volt supplies are provided - one active when the projector is switched
on (to activate an electric screen for example), the second active when 16/9 or
wide image format is selected (to activate a screen mat system). |
 |
PROJECTION
CRT: 3 x 07MS 7” high brightness, high resolution CRT’s, liquid cooled,
air coupling, average life of more than 10000 hours
Lenses: 3 DELTA TAC 4 hybrid lenses for improved focus quality, full color
corrected, high resolution; 135 mm focal length.
F number f/1.0 focus adjustments at center and borders
Brightest: 900 lumens at white peak
Picture size: 60“-250“ diagonal screen width; 122cm-508cm
Installation: rear or front projection; either floor or ceiling mounted (ceiling
bracket supplied)
ELECTRONICS
Horizontal scan frequency: 15-16 KHz and 32-38 KHz autolock
Vertical scan frequency: 45-150 Hz autolock
Bandwidth: 20 MHz
Dynamic focus: horizontal and vertical
Resolution: more than 1000 TV lines with RGB video input, 640x480 pixels with VGA
input
Color temperature: 3200°K, 6500°K, 9300°K, plus one user choice selectable and
adjustable by remote control
Color system: quad standard (PAL, SECAM, NTSC 4.43 and 3.58)
Convergence type: digital convergence with 17 adjustments made by remote control
Cut-Off: automatic to improve the color temperature stability
Keystone: adjustable trapezium correction with a maximum of 20°
Masking: horizontal and vertical masking adjustable by remote control
Test pattern: 8 internal test patterns
INPUTS/OUTPUTS
Composite video 1: via BNC or SCART
Composite video 2: via BNC
S-VHS Input 1: via mini DIN 4-pin
S-VHS Input 2: via SCART
RGB HV input: via 5 x BNCs or SCART
Computer input: via 15 pin D-sub
Video output: via BNC
Serial interface: via DB 9 connector
Output voltage: 2 power jacks with 12 Volt DC, 10 mA max output power supply: one
is active only when the projector is ON, the other one is active only when a 16:9 or wide
image format is selected
GENERAL
Information: On Screen Display by Remote Control
Input voltage: 120-240 Vac 48-62 Hz with Power Factor Corrector; 220-240 Vac 48/62
Hz
Power consumption: 220 Watt max (6 Watt on stand-by)
Dimensions (WxHxD): 24,4“ x 11,4“ x 27,5“ (620 x 290 x 700 mm)
Packaging dimensions (WxHxD): 31“x19“x34“ (800 x 490 x 880 mm)
Net weight: 77 Ibs (35 Kg)
Safety: in compliance with EN60950
Operative function conditions: temperature between 0°C and 40°C, relative
humidity from 0% to 90% not condensed |
|
   
|
 |
|
| |
|
SVD 800 HT-0
SVD
500 HT Plus 
HHT-300
T 
HT-200 & HT - 250
