New, improved 8" CRTs for greater image clarity
High Definition HD 8B lenses
Impressive brightness (1200 peak white lumens)
Ull HDTV standard compatibility
15-105 KHz horizontal scan rate
Image resolution up to 1600x1400 pixels
Internal Up converter (optional)
The SDG 900 PLUS throws outstandingly contrasted images,
high in contrast, brightness, sharpness and color fidelity. With autoranging horizontal
scan frequencies from 15 KHz to 105 KHz, the SDG 900 Plus range is compatible with
virtually any source including video, HDTV, image enhancing devices (quadruplers, scalers,
etc.) and high resolution computer graphics up to 1600x1400.
The SDG 900 Plus has been developed using the most
advanced technology and is completely modular in design. A three input slots are available
with RGB, VGA, Video and
multistandard decoder and S-VHS (standards), while Y/R-Y/B-Y is an optional.
SMD technology, coupled with gold plated edge connectors, minimizes cables, cross
talk, video noise and electromagnetic emission.
The SDG 900 Plus Projector is easy to use and software controlled for convergence
and set up. It is supplied with mounting brackets, a backlit remote control for simple set
up and operation with on-screen menu and a compact remote for everyday use.
Picture quality can be further enhanced by an optional built-in Up Converter (real
time line doubler). The higher scan frequency (progressive signal or line/field doubling)
gives a better image and perfect motion tracking, reduces noise and improves sharpness.
The Up Converter is controlled by remote control and uses IQTV technology. There are
different conversion modes including 9-points median interpolation and Film mode which
offers perfect motion tracking.
Projection
CRT: 3 x 8" CRTs, liquid
cooled,high brightness, high resolution; with impregnated cathode for long life (average
life: more than 10,000 hours)
Lenses: HD8B, high definition fully color corrected by
multilayer coating. Main lens quartz glass.Focal length 140 mm. F number f/1.1. Focus
adjustments for the center and borders. Optical resolution more than10 Ip/mm at 50% MTF
Brightness: 1200 peak white lumens
Picture size: 60"-300" diagonal, 182-609 cm screen
width Installation: rear or front
projection; either floor or ceiling mounted (ceiling bracket supplied)
Electronics
Horizontal scan frequency: 15-105 KHz
autolock
Vertical scan frequency: 38-150 KHz autolock
Bandwidth: 75 MHz - 3 DB (RGB input)
Resolution: RGB input:1600 x 1400 pixels
Flyback time: Horizontal: 2.4 µs typ
Vertical: 150 µs typ
Color temperature: 3200-6500-9300°K plus one user choice
selected and adjusted by
remote control. (6500°K factory preset). Automatic Cut-Off; automatic highlight
adjustment
White uniformity: better than 8% on the color temperature
ANSI method
Color system: PAL, SECAM, NTSC 4.43,NTSC 3.58 automatically
switched
Test signals: 8 internal test patterns
Electronic Improvements: D.T.I. and C.T.I. always active, noise
reduction ON-OFF selection,sharpness control, comb filter ON-OFF selection, Luma-Chroma
delay adjustment, NTSC: Hue adjustment, 4/3, 16/9 and wide aspect ratio.
Memory manager: save, copy and move in 40 labeled configurations
Source information: On Screen Display source information
selected by remote Control
Miscellaneous: automatic daily switch ON and OFF; tubes working
times; built-in clock
Input/Output - Three input slots with:
RGB Input: 5 x BNCs
VGA input: via 15 pin D-sub (VGA, SVGA, XGA, etc.)
Video input: via BNC
S-Video (Y/C): via 1 mini DIN 4-pin
Video output: via BNC
Serial interface: D-Sub 15-pin connector (RS 422 - RS 232
standard)
General Data
Input voltage: 120 Vac 48/62 Hz; 220 - 240 Vac 48/62 Hz
Power consumption: 500 Watt
Dimensions (WxHxD): 620 x 305 x 820 mm
Packaging Dimensions (WxHxD): 840 x 500 x 1030 mm
Net weight: 55 Kg (121 Ibs)
Shipping weight: 65 Kg (143 Ibs)
Safety: in compliance with EN60950
Operative function conditions: temperature between 0°C and
40°C, relative humidity from 0 to 90% not condensed
Optional Accessories
Up-converter (built-in): for line doubling, field
doubling for both progressive and interlaced
signals.
YCrCb component input board
Return To Top
HT-200 & HT - 250
