| PROJECTION |
| CRT: |
3 x 07MS 7“ high
brightness, high resolution CRT‘s, liquid cooled, air coupling, average life more
than 10.000 hrs |
| Lenses: |
3 HD 145 high
definition fully color corrected by multilayer coating, high resolution, 135 mm focal
length. F number f/1.03, focus adjustments for the center and borders; optical resolution
more than10 lp/mm at 50% MTF |
| Brightest: |
145 ANSI lumens (950
lumens at white peak) |
| Picture size: |
60“-250“
diagonal screen width; 122 cm-508 cm |
| Installation: |
rear or front projection;
either floor or ceiling mounted (ceiling bracket supplied) |
| ELECTRONICS |
| Horizontal scan
frequency: |
15-16 KHz and 30-38 KHz
autolock (VGA and S-VGA compatible) |
| Vertical scan
frequency: |
40-130 Hz autolock |
| Bandwidth: |
20 MHz |
| Dynamic focus: |
horizontal and vertical |
| Resolution: |
more than 1000 TV lines
with RGB video input; 800 x 600 pixels with S-VGA input |
| Color temperature: |
3200° K, 6500° K,
9300° K, plus one user choice selectable and adjustable by remote control |
| Color system: |
quad standard (PAL, SECAM,
NTSC 4.43 and 3.58) |
| Convergence type: |
digital convergence
with 17 adjustments made by remote control |
| Cut-Off: |
automatic to improve
the color temperature stability |
| Keystone: |
adjustable trapezium
correction with a maximum of 20° |
| Masking: |
horizontal and vertical
masking adjustable by remote control |
| Test pattern: |
8 internal test
patterns |
| INPUTS/OUTPUTS |
| RGB Input 1: |
via 5 x BNC (R, G, B,
H/V, V) |
| RGB Input 2: |
via SCART |
| YCrCb input: |
via 3 x BNC |
| VGA input: |
via D-sub 15 pin |
| Video Input 1: |
via BNC or via SCART |
| Video Input 2: |
via BNC |
| S-VHS input 1: |
via mini DIN 4-pin |
| S-VHS input 2: |
via SCART |
| Video output: |
via BNC |
| RS 422 Serial interface: |
via DB 9 connector |
| Output voltage: |
2 different power jacks with
12 Volt DC, 10 ma max output power supply: one is active only when the projector is ON,
the other one is active only when a 16:9 or wide image format is selected |
| GENERAL |
| Information: |
On Screen Display by
Remote Control |
| Input voltage: |
90-270 Vac 48-62
Hz with Power Factor Corrector |
| Power consumption: |
220 Watt max |
| Stand-by consumption: |
6 Watt |
| Dimensions (WxHxD): |
620 x 290 x 700 mm
(24“ x 11“ x 27“) |
| Packaging dimensions
(WxHxD): |
800 x 490 x 880 mm
(31“ x 19“ x 34“) |
| Net weight: |
35 Kg (77 lbs.) |
| Operative function
conditions: |
temperature between 0°C and
40°C, relative humidity from 0% to 90% not condensed |
HT-200 & HT - 250
: